CRO Moto 2015-2023 Road Glide Baja Designs LP6 Lighting Combo Kit

CRO Moto
127051
Many in stock
Light Mounts/Combos
$369.99
Snap Logo Lease for as low as $/week Learn More

complete your look

$369.99
×

$649.99
×

$149.99
×
Total:
$0.00

GET THE ULTIMATE LIGHTING FOR YOUR ROAD GLIDE!

Equipping your Harley Davidson Road Glide with a set of Baja Designs LP6 lights ensures you have the ultimate lighting solution for an unmatched riding experience.

Get ready to light up the night with our CAD-designed Lighting System.

Unlike any other system available, this three-tiered bracket system has the installer in mind as well as you, the customer, if ever need to switch back to stock.

This system clears most large power amps, and installs in less than 20 minutes.

Our system blocks out all the bugs, heavy debris, and most of the water that would otherwise hammer the electronics.

Combining our custom-engineered wire harness that pulls NO OEM power from your bike, with our bracket system makes for a safe and easy install.

As a full-service shop, have had the opportunity to install customer-provided kits as well as re-sell other brands. Combining this experience with our years of industry experience creating other well-thought-out kits, we decided to design a kit that was worthy of the masterpieces they go on!

No need to wait 8-10 weeks to get these kits. We do our best to keep these kits in stock and try to ship within 24 hours.

Simply Put... The Absolute Brightest Light Kit Available for your Road Glide.

This Kit comes complete with a CNC Powder-coated Gloss Black Mounting Bracket, Hardware, and Our Spec Engineered Plug and Play Wire Harness all Made In the USA.

FITMENT: This kit will fit all Road Glide Standards, Specials, ST's, Limited's and CVO's. The fins on the LP May need to be trimmed to clear large amps. This is not a problem and does not affect your warranty. This kit WILL NOT fit with aftermarket amp racks/brackets such as Lex Rivera or Curley's.




CRO Moto Harness:

The Original Harley LP6 Wire Harness is proudly engineered here in California. It's created to meet or exceed both manufacturers' quality standards from H.D. to Baja Designs.

Easy to use and 100% Plug and Play using relays and specially wired to "Eliminate" Additional Amp draw from your existing H.D. Harness. We have engineered this kit to be safe and effective in using only the "trigger" from your H.D. to signal the harness which controls 3 key functions. Daytime Running, Low and High Output.

Avoid costly and permanent damage to your bike's factory harness. When plugging in BIG HORSEPOWER Lighting you want the Best and Safest System to protect your investment. ALL Our H.D. Wire Kits come with a Life Time Warranty.


Baja Designs LP6 Lights:

The LP6 Pro is a 6-inch powerhouse featuring a total of 11,225 lumens and of 200-degree spread of usable LED light thanks to the dedicated peripheral lighting of our patented Integrated Peripheral Technology (IPT). To keep your light performing at its highest potential, the LP6 integrates our proprietary Direct Ducted Cooling (DDC) technology. This feature allows air to travel through the front of the housing, over the rear heat sinks – drastically improving cooling capacity and performance. With a colored daytime running light, low power, and high-power mode, the LP6 easily fulfills all your lighting needs.

The LP6 Pro is available in multiple patterns to suit your needs. The Driving/Combo pattern provides maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42 degrees) and spot (8 degrees) optics to provide you with a smooth blend of light for both near-field applications and distance (Lighting Zones, 1,2, 3). The Spot pattern is a longer and narrower 8-degree beam focus for illumination further down the trail or road (Lighting Zone 4 & 5) and is designed to be used in conjunction with additional wide cornering and/or driving/combo auxiliary lights.

The addition of red, blue, or green backlight options alongside our original amber on the LP6 Pro gives enthusiasts the choice to customize their vehicle for shows, photo shoots or anywhere they want to bring attention.

Disclaimer: Baja Designs LP series lights with red, blue, or green backlights are for EXHIBITION USE ONLY. Never use it on public roads to avoid confusion with law enforcement or emergency vehicles. The owner/driver is responsible for observing all highway equipment laws and safety regulations.

  • Satisfaction Guarantee – 30-Day Money Back Guarantee
  • Limited Lifetime Warranty – Complete Purchase Protection
  • uService – Replaceable Lenses And Optics
  • ClearView – All The Light, Right Where You Need It
  • MoistureBlock – Waterproof, Rain Proof, Submersible
  • CopperDrive – Safely Driving LEDs at 100%

5000K Daylight – Less Driver Fatigue, Natural Color* Lifetime warranty on Harness, Must have proof of purchase from CRO. Warranty void if harness modified and or installed improperly.


Installation Instructions: Road Glide LP6 Installation Instructions
Installation Video: Road Glide LP6 Cali Moto Install Video


What’s Included:

Qty Brackets Included
1
127051-1 Rear Mounting Plate 
1
127051-2 Left Side LP6 Mount
1
127051-3 Right Side LP6 Mount
1 127051-4 Front Tin Gloss Black 


Qty Misc. Items 
1 11.25" Long Rubber Top Seal 


Hardware Included:

QTY Hardware List
1
3/16 Allen Wrench (T-handle preferred)
1 5mm Allen Wrench (T-handle preferred)
1
T-30 Torx Driver
1 T-25 Torx Driver
1 #2 Phillips Screw Driver
1 7/16 Wrench / Socket
1 Blue Loctite (Or Equal) Do not use Red

 


    This browser does not support PDFs. Please download the PDF to view it: Download PDF.

    Related Products

    CUSTOMER REVIEWS

    Customer Reviews

    Based on 4 reviews Write a review
    The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site. privacy policy
    accept

    Your cart

    ×